![]() | ![]() |
| ||||||||
| Home | Forums | Register | Search | Today's Posts | Mark Forums Read |
| Computers & Technology Computer talk for the nerdy or the needy. Post your technology related topics or tech questions here. |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| ||||
| It comes up with a blue screen and says that i need to remove the hard drive or hard drive controllers or run /chkdsk, but I know the hard drive is ok. It was working in a different computer. But my hard drive that was in it just doesn't even detect it there.
__________________ The difference between ninjas and crazy people is ninjas throw shurikens and spears, crazy people throw tantrums and poop. |
| ||||
| What about your cables. Using new ones, or the old ones.
__________________ Remember Risk? Now there's an online version called Warfish. Click the link to check it out. http://warfish.net/networks/tubaman http://www.taurusarmed.net |
| ||||
| Brand new cables. Here is the exact error. A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer Technical Information: ***Stop:0x0000007B (0xF9678528, 0xC0000034, 0x00000000, 0x00000000 The hard drive works in the original computer it came from, so I know it's not corrupted.
__________________ The difference between ninjas and crazy people is ninjas throw shurikens and spears, crazy people throw tantrums and poop. |
| ||||
| The only thing I can think of is to check your jumpers on your drives and make sure they are jumped properly as to main or slave settings.
__________________ Politicians are like diapers, they both need changed occasionally for the same reason. Calling an illegal alien an "undocumented immigrant" is like calling a drug dealer an "unlicensed pharmacist" The hard work of one will do more than the prayer of millions. |
| ||||
| the cause... http://support.microsoft.com/default...;en-us;Q316401 SYMPTOMS When you start your Microsoft Windows XP-based computer after you replace the motherboard on the computer, you may receive a Stop error message that is similar to the following: STOP 0x0000007B INACCESSABLE_BOOT_DEVICE CAUSE This issue may occur if the new motherboard contains an embedded IDE controller that has a different chipset than the original motherboard. RESOLUTION To resolve this issue, use one of the following methods. Method 1: Perform an in-place upgrade of Windows XP If the old IDE controller and the new IDE controller detected your hard disk as the same size, perform an in-place upgrade of Windows XP. How to perform an in-place upgrade (reinstallation) of Windows XP : http://support.microsoft.com/kb/315341/ Method 2: Repartition and format your hard disk and reinstall Windows XP If the new IDE controller detected a different size for your hard disk, you must repartition and format your hard disk, and then reinstall Windows XP. How to partition and format a hard disk in Windows XP http://support.microsoft.com/kb/313348/ |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
